M.M.PARKER LTD
 

Linear UV Exposure units:

 
These units use a vacuum to ensure the artwork and material being exposed are held in perfect contact. When fine tracks are required on a PCB or detailed definition on a graphic reproduction. The time is  set via the touch membrane control panel and the start button pressed. This activates the integral vacuum pump which removes the air from the chamber ensuring perfect contact between artwork and material to be exposed. Only when a vacuum has been achieved will the tubes activate and the exposure commence. When completed the vacuum pump is turned off and a valve automatically releases the vacuum allowing the lid to be raised. All units come complete with an IEC socket and moulded 13 amp plug.PAR1 is available without a vacuum if required.
Model Exposure area: mm UV Output sizes:mm wieght:kg
PAR1 330x355 6 x15w 550x485x170 16
PAR2 350x535 6 x 20w 720x580x170 22
PAR3 575x680 10 x 20w 765x730x178 34
PAR4 520x927 12 x 20w 890x1031x215 90

Note: PAR4 is made with a mylar film vacuum system. Not with
a rubber vacuum blanket & glass like PAR1-3.

Double Sided Linear UV Exposure Units:

Expose two sides at one time. This double sided vacuum UV is an essential tool for the production of double sided PCBs. The ability to expose both sides of the board at once eliminates the immense problem of artwork registration for two separate exposures on a single sided unit. The flexible mylar film is fitted in front of the tubes in the lid which closes onto the glass base beneath. The units feature a switch to enable the bottom set of tubes to be turned off for single sided exposures. All three units are supplied complete with an IEC socket and moulded 13 amp plug. Timer can be set in the ranges of 0-999 seconds.
Model: Exposure area: mm uv output Sizes: mm Weight
PDS1 260x355 8 x 15w 550x485x170 16
PDS2 350x535 12 x 20w 720x580x170 25
PDS3 520x927 24 x 20w 890x1031x215 60

Contact us:

Tel: 01992-618006

Fax: 01992-812583

sales@mmparker.com